.

Maintenance – perfect care and the best service

To ensure the maximum availability for use of you screed machines, a regular maintenance is absolutely necessary. For this purpose, we offer special maintenance contracts.

Make also use of the winter and summer check-up. Thus, your machines are always ready for the hard work on construction sites. In addition, we daily operate DEKRA inspections, like general inspections, brake tests and special tests.

Ask us, we will be happy to advice you.

Attention: Value and guarantee preserving actions

 

Daily maintenance and check-up‘s

  • Before the operation, the machine has to be checked for visible defects.
  • Check hoses and couplings for sound condition
  • Check engine oil-level of the drive.
  • Check oil-level of the screw compressor at the gauge glass. The level always needs to be in the green area.
  • Sealing of mixing shafts and mixing bearings need to me lubricated twice. Carefully clean lubrication points. Fill up until grease visibly leaks. (With a central greasing unit the lubrication of the mixing shaft is not necessary)
  • Daily lubricate the venting of the lid. Clean lubrication points. Lubricate until grease visibly leaks.
  • Daily lubricate security unit of the mixing tank. Carefully clean lubrication points. Lubricate until grease visibly leaks.

Weekly maintenance in addition to the daily check-up‘s

  • Weekly lubricate lever bearing of the mixing tank – lid. Carefully clean lubrication points. Lubricate until grease visibly leaks.
  • Weekly grease all lubrication points of units with a hydraulic feeder. Carefully clean lubrication points. Lubricate until grease visibly leaks.
  • Check brakes and overrun unit
  • Check power belt and V-belt and replace if necessary
  • Check mixer and wear parts and replace if necessary
  • Check return valves and strainer and replace if necessary

Maintenance (every 50 working hours), in addition to the weekly maintenance

Maintenance semiannual ( every 500 working hours) in addition to the first inspection

Yearly maintenance (every 1.000 working hours) in addition to the semiannual maintenance